I tried to install this and it is too hard and stiff to go onto the glass. After trying it with a mallet, it cracked and was unusable. Terrible product.

My sliding glass door never had a track installed. The rollers were rolling on the door bottom making it difficult to slide the door. Installation of this track was very easy. I had to cut off about an inch to fit my doorway. Laid it in the track, screwed it down using the pre-drilled screw holes, reinstalled the door and Slide Away. Made quite a difference. and as we continue to open and close the door, it seems to be rolling even easier.

El producto me llego muy rápido , y pude remplazar las ruedas , pera hacer el cambio no fue facil como yo creía pero la puerto esta arreglada

It came undamaged in shipping tube but the piece was not straight all the way through. I had to heat up the piece in places to bend the plastic back where it should be so it would fit in the track. Finally got it to fit pretty good. Not perfect but it works. If this one doesn't last I will order somewhere else. If it would have been perfect shape it would have been a very simple install.

I work for a window and door company. We had a leaky door located right on the ocean. I bought this and it worked great. The door slab was too wide for it so I had to cut interior side off. But it still sealed everything up great. I have no idea how it will hold up to the sea air but overall I’m very happy with it.

I work for a window and door company. We had a leaky door located right on the ocean. I bought this and it worked great. The door slab was too wide for it so I had to cut interior side off. But it still sealed everything up great. I have no idea how it will hold up to the sea air but overall I’m very happy with it.

It’s hard to find. Expensive but it works.

I have a large front door, and needed an oversized sweep for the bottom. This 48" sweep looked good, so I ordered it, planning to cut it down to the 42.5" that I need. They ship it in a long cardboard box of triangular dimensions, and it is flimsy in such a very long length of cardboard that is only about 6" on a side (triangle, three-sided box, 4.5 feet long). As you might expect, it came to me bent from transit. The box was clearly collapsed and bent so many times it was just flexible, no strength left in it. The metal sweep was of course bent as well, which is a problem to mount on a straight, flat door. I was thinking of sending it back, but pretty sure others will be shipped just as poorly. So I undertook the effort of straightening it out, which is fairly time-consuming and challenging, since it's well-made enough to resist either bending or straightening. I used some clamps along a length of 2x6, and put shims under the bent parts to allow the clamps to apply variable pressure in ways that eventually did get it straight enough to use. If this had been any more badly bent, that would not have been possible - basically, if any of the metal had "kinked" into a point. But it was all just curved type bends, allowing for straightening. With this very poor shipping material, it could easily have arrived in an L-shape, and forced a return. I got lucky, plus had the skill and clamps and time to fix it. I'll add some pics if I get a chance, but to summarize: 1> works fine, once I cut it to length and straightened it out adequately. 2> The manufacturer needs to ship it in a strong cardboard tube, such as you'd use for a rolled up picture or poster, or other long, skinny, fragile things. I've had many things shipped in that manner, never had one come in crushed or bent (although that is possible regardless how strong of a tube you use). Just - as it stands, my guess is that 90% or more of them arrive bent. That's just stupid and thoughtless, and no doubt results in lots of needless returns. 3> Installing this was fairly straightforward, since I had the needed drills and drivers. But they should include the right bit with the screws, for those who do NOT necessarily have the exact bit needed here. 4> Aesthetically, this sweep is good looking and well-made. 5> I have a side cutter (rotary blade grinder type) that cut this to length with ease. A hacksaw would work too, but lots more work. A saws-all (reciprocating saw) with a hacksaw type blade would also work, but these last two would need clamps and things I was able to avoid using the side cutter. I did it by hand, easy peasy. Note that any of these should involve eye protection - saws and bits of metal are nothing to mess with, protect your eyes (goggles), protect your hands (gloves). 6> All told, this took about 2 hours. It was about an hour to straighten it out (could have done it in 20-30 minutes without distractions), and another hour or so to measure, cut it a bit long, hold in place, measure again, cut more carefully for the final length and shape, then clamp it to the bottom of the door and drill/screw it into place. Not trivial but not especially challenging either. In the final analysis, I don't know whether to recommend this or not. It's quite a nice sweep, but it could arrive too bent to use, and will do so on many occasions if mine is any example. That box is just stupid bad. So, your call on if you want to risk having to return it two or three times before getting a straight one, or if you want to look at other similar solutions. But there aren't a lot to choose from in the length I needed, and that 48" length was perfect for my outsized needs. Good luck!

I searched the two big box hardware store looking for a raised threshold nobody beats Amazon

I kept searching for the exact measurement with no avail. I love that this is able to be cut easily and intalled in minutes!

The product is represented accurately in the product description.

This handle is so big! Very well made, and adds a lot of drama to a frame less glass enclosure. And this was half the price the glass company was charging me! Just buy it, you'll love!